Charger XTAR MC2 for 18650/26650 USB Li-Ion 2 chanels

XTAR MC2 charger for 14500/26650 USB Li-ION 2 channels.

Professional processor charger!

XTAR MC2 is a charger that surpasses others in quality. It is lightweight, with ultra-compact size. It was designed, very solidly and pragmatically. MC2 inherits the best features of all XTAR manufacturer chargers. It can charge rechargeable batteries of sizes: 10440/ 14500/ 14650/ 16340/ 17335/ 17500/ 17670/ 18350/ 18490/ 18500/ 18650/ 18700/ 20700/ 21700/ 22650/ 25500/ 26650. The charger cannot charge protected Li-ION batteries of sizes: 20700 and 21700. It can charge the cells exactly up to 4.2V and automatically stop the process, when the charging is finished. So, you no longer have to worry about whether the battery will be overcharged, which directly affects its life. It weighs only 44 grams and this is a very good result. It allows you to charge 26650 cells (one unit), without an adapter and together with the USB port, it is very convenient, even when traveling.

What distinguishes the MC2 charger ?

• three-stage processor-controlled TC/CC/CV charging process

• two independent charging channels
• powered by any micro USB charger or from a computer USB port (1A)
• compact, small size - easy to carry
• 0V Activation Function can save your "dead" batteries (voltage >2.0V).
• protections: short circuit, thermal, reverse polarity
• 12-month warranty

Included with the Xtar MC2 charger, you get a micro USB cable. For the set, you need a power adapter, such as for your phone, or a computer with a free USB port. The minimum power supply should be 1000mA.

An interesting and safe solution in the MC2 charger is a separately connected power supply. This prevents unnecessary heating of the charged cell. When the set is working, the power supply itself heats up and not the charged cell. As a result, the temperature during charging, can rise no more than 15 degrees on the cell. This directly affects the life of the battery.

In the MC2 charger, we can also recharge the batteries, up to full. First, we put the battery into the charger and wait until its voltage drops below 4.1V. This will occur during the self-discharge process. Batteries with a voltage of 4.1V or higher are treated as charged by the charger. Charging will start when the voltage drops below 4.1V.

On the other hand, the 0V Activation function, reactivating discharged cells, involves inserting a cell into the charger and checking the voltage. With this function, we can check each cell in the appropriate size. When a discharged cell is detected, the charger will attempt to reactivate it. Note that exceeding the minimum voltage on the cell will limit the possibility of reactivating and saving such a battery.

Technical data:

• manufacturer: XTAR
• charger model: MC2
• supported battery types: 1-2 Li-ION 3.6 - 3.7V batteries, protected and unprotected
• supported battery sizes: 10440/ 14500/ 14650/ 16340/ 17335/ 17500/ 17670/ 18350/ 18490/ 18500/ 18650/ 18700/ 20700/ 21700/ 22650/ 25500/ 26650 (does not charge secured 20700 and 21700)
• maximum battery length: 70mm
• input voltage and current: 5V DC 1000mA
• output voltage: 0.5A x 2
• power socket: micro-USB
• recommended power adapter: 5V 1A
• charging method: processor-controlled TC/CC/CV
• charging current : in CC phase 250 or 500mA ±50mA (depending on the power source used)
• charging termination voltage: 4.2V ±0.05V
• termination current: <40mA
• additional functions: reactivation of deeply discharged cells
  
• protections: thermal,short-circuit, against reverse battery insertion
• warranty: 12 months
• dimensions: 92 x 40 x 32mm
• gross weight: 90.20g
• net weight: 44g (charger alone)
  

User manual EN

All XTAR products are sold with a label on the package containing a unique originality code. To check the authenticity of the product, please pay attention to the sticker on the case of the device.

Please here, scratch off the layer and write down the unique 18-digit product number.

On the manufacturer's website, enter the 18-digit number in the appropriate fields, available here: http://www.xtar.cc/intro/14.html. After verification, we will know if our device is original and actually manufactured by XTAR.

The kit includes:

• MC2 charger
• Micro USB cable
• User manual
• Warranty

Extras:

XTAR AC/5V 2.1A USB Wall Adapter Plug

CE Certificate of Conformity with the EMC Directive
User Manual EN